undefined
+
  • undefined

Special waterproof coating for kitchen and bathroom furniture.

Hutch defends domestic outfit dedicated waterproof coating with acrylic emulsion, additives, fillers, water and other components, through scientific processing and become a kind of excellent domestic

Numbering:

1023958787595001856

Detail

I. product overview
LD hutch defends domestic outfit dedicated waterproof coating imported emulsion as raw material, add A variety of additives and special materials, the scientific process and become A kind of superior performance of domestic outfit dedicated waterproof coating, the most obvious feature of the product is by the state authority detection of volatile organic compounds (VOC), benzene, toluene, ethyl benzene, dimethyl benzene emissions as "not detected", meet and exceed the national to the harmful substance content in waterborne architectural waterproof coating grade A standard, meet the needs of the family now pay attention to choose environmental protection products.
Ii. Implementation standard: JC/T 864-2008 polymer emulsion building waterproof coating

NO:

Inspection items

Standard requirement

(type I)

The inspection results

single

comments

Inspection basis

1

appearance

The product has no lumps after stirring and is in a uniform state

The product has no lumps after stirring and is in a uniform state

Conform to the

JC/864-2008

5.3

2

The tensile strength

 

1.0MPa

2.8MPa

Conform to the

JC/864-2008

5.4.3

3

Fracture elongation

300%

396%

Conform to the

4

Solid content

65%

77%

Conform to the

GB/T16777-

1997第4B

5

The drying time

 surface drying time 

4h

20min

Conform to the

JC/864-2008

5.4.7.1

hard drying time

8h

50min

Conform to the

JC/864-2008

5.4.7.2

6

impervious(0.3MPa,30min

impervious

impervious

Conform to the

JC/864-2008

5.4.5

7

Low temperature flexible

(绕φ10mm棒弯180°)

- 10 ℃ no crack

- 10 ℃ no crack

Conform to the

JC/864-2008

5.4.4

8

Tensile strength retention rate after treatment

Heat treatment

80%

103%

Conform to the

JC/864-2008

5.4.3

9

 

Fracture elongation after treatment

Heat treatment

200%

457%

Conform to the

Alkali treatment

200%

645%

 

Conform to the

Acid treatment

200%

591%

Conform to the

10

Heating shrinkage

elongation

1.0%

Telescopic 1.0%

Conform to the

GB/T16777-

1997第9

To shorten the

1.0%

 

 

 

Inspection items

Standard requirement

The inspection results

A single conclusion

A

B

1

Volatile organic compounds

voc);g/L

80

120

Did not check out

Conformance to (A)

2

Free formaldehyde,mg/kg

100

200

26.2

Conformance to(A

3

Stupid + toluene + ethylbenzene + xylene,

Mg/kg

300

Did not check out

Conform to the

4

ammonia,mg/kg

500

1000

482

Conformance to(A

(blank below)

Note: not detected: volatile organic compounds (VOC) <2g/L;

Stupid + toluene + ethylbenzene + xylene <2mg/kg              

 
 
3. Scope of application
It is used for building waterproof project of indoor non-long-term immersion water environment, such as bathroom, kitchen and wall.
4. Performance characteristics
1. Water-based, environment-friendly, non-volatile organic compounds, non-toxic and tasteless, no exhaust emissions, no pollution to the environment, can be applied to confined Spaces.
2. Strong adhesion, good extensibility and excellent followership.
3. Skin waterproof, forming a seamless connection, infiltrating and sealing the pores of the base layer, without channeling water, easy operation of the base surface with heterogeneous structure or complex shape.
4. Convenient construction, out-of-the-box use, direct painting and curing at room temperature.
5. Construction methods
Base processing
The base surface should be smooth, firm, non-loose, sanding, no clear water, no floating ash, no oil, mould remover and other stains, and the uneven and cracks must be smoothed first.
The node processing
Before large area painting, the special parts such as yin-yang Angle, water outlet and pipeline interface are strengthened. Paint the area first, then apply a pre-cut fiberglass cloth or non-woven cloth, and then apply a waterproof coating after drying.
Waterproof construction
First time brushing paint mixed with water according to the proportion of 1:1, mechanically fully stir well, with water as medium, let the diluted paint into concrete capillary pores, closely integrated with the base level, for the first time for the second time brushing after drying, besmear brushs while adding glass fiber cloth or nonwoven, will smooth cloth shop is stuck, pressure is the surface coating. Apply the third brush after the second drying. No water is required for the second and third normal brushes.
Notes:
▶ every time brushing direction should be perpendicular to each other last time.
▶ before again after coating is dry, can on to the next time brushing.
▶ head and edge, increase paint coating to seal.
▶ should not be below 5 ℃ construction, rainy days can not open the construction.
▶ construction of appropriate thin besmear to brush, not a one-time thick coating, coating thickness should comply with the design requirements.
▶ when completed, shall be continuous dry 7 Arabian water experiments.
▶ if you want to be a protective layer, but before the last layer has not been solidified, sprinkle with coarse sand on the surface or fine stone meters, strong the binding between the protective layer and the waterproof layer.
Reference usage: 1 mm thick amount is about 1.0 kg / ㎡.
Packaging, storage and transportation
1. This product is packaged with plastic drum seal, which is non-dangerous and can be transported safely.
2. The shelf life of unopened product is 6 months, and it should be used within 24 hours after opening.
3, should be stored in a dry, cool, ventilated place, storage temperature at 5 ℃ to 35 ℃.
 

Keyords

Waterproof coating

kitchen and bathroom special paint

yanronda waterproof.

Scan QR code to view with phone